SDR Quick Start Manual

 
 
- You can use USB cable to supply power to the unit (requires Y cable for drawing power from two USB sockets simultaneously (630mA).
 
- You will need to download and install USB drivers when using USB cable for the Radio signal.
 
- No additional drivers are needed when it is connected through Local Area Network (Ethernet).
 
- Andrus SDR will acquire Ethernet IP address from the DHCP server in your network.
- SDR radio softwares have the discovery mode for finding the Andrus SDR in the local network.

Please make sure that following ports are open in firewall in your computer
- The default SDR TCP port is 50000
- The default UDP ports are 48322 and 48321
 
The following software supports sdr mk1.5 natively over network
(including download link):
Mac OS X: SdrDx, download at http://fyngyrz.com/?p=915;
Windows: SDR-radio, download at: http://sdr-radio.com; Cute SDR SE, download at http://code.google.com/p/cutesdr-se/ 
 
The following software supports sdr mk1.5 natively over USB
Windows: HDSDR, download athttp://www.hdsdr.de/